FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil
FTM packer FL11 - Emisil

Fusée de poche | FL11

Prix régulier€668,75
/
Taxes incluses.

Gros jouet pour grand garçon ! 🚀

Bourse 3D
Avec deux testicules mobiles
Conçu pour l'emballage
Taille confortable
Peau hyper réaliste
Technique 3 couches de silicone

Ce modèle a un scrotum bas et suspendu, avec deux testicules mobiles. Les testicules flottent dans un gel spécialement conçu pour offrir une sensation extrêmement réaliste.

La technologie professionnelle de superposition de différents silicones permet de recréer une texture de peau ultra réaliste. Des rides, des nuances et des différences entre les calques apparaissent lorsque vous appuyez dessus.

Système de silicone à trois couches : cela signifie qu'il n'y a aucune chance que la peinture s'efface ou que la couleur s'estompe. non seulement un packer non coupé réaliste lorsque vous le regardez, Pocket Rocket semble également ultra-réaliste lorsque vous le touchez. La tige massive est la clé pour ressentir la puissance entre vos jambes. 

  • Fabriqué à la main par des professionnels
  • Scrotum 3D avec deux testicules flottants mobiles
  • Look hyper réaliste
  • 16 nuances de peau différentes
  • 5 différentes options de cheveux naturels

Conçu pour tous jour porter. Pas adapté pour rapports.

    Choisissez la bonne taille pour vous assurer d'obtenir la bonne taille. Nous vous recommandons de vérifier notre guide des tailles avant de passer la commande. Attention, les ventes sont définitives, les produits ne sont pas remboursables.

    ❗️ Option - prix prépuce coulissant +90,00 EUROS (Désolé pour le moment, non disponible)

     


     

      Tableau des tailles

      ⚠️ Since our production is handcrafted, there may be slight variations in the size.

      FLACCID MODELS (soft packer)

      Junior | FL01
      Length  3.9 in 10 cm
      Insertable length 4.9in 4.9 in 12.5 cm
      Girth 5.12 in 13 cm
      Weight 8.11 oz 230 g

       

      Gerald | FL02
      Length  4.7 in 12 cm
      Insertable length in 3.7 in 9.3 cm
      Girth 4.3 in 11 cm
      Weight 7.6 oz 215 g

       

      Pickle | FL04
      Length  3.7 in 9.5 cm
      Insertable length 4.9in 2.7 in 6.9 cm
      Girth 4.3 in 11 cm
      Weight 8.8 oz 250 g

       

      Leroy | FL05
      Length  3.7 in 9.5 cm
      Insertable length 4.9in 2.9 in 7.4 cm
      Girth 4.3 in 11 cm
      Weight 9.5 oz 270 g

       

      Pcoket Rocket | FL11
      Length  6.7 in 17 cm
      Insertable length 4.9in 5.7 in 14.5 cm
      Girth 5.5 in 14 cm
      Weight 16.22 oz 460 g

       

      ERECT MODELS

      Johnson | ER01
      Length  5.9 in 15 cm
      Insertable length 4.9in 4.9 in 12.5 cm
      Girth 5.12 in 13 cm
      Weight 8.11 oz 230 g

       

      Boner | ER02
      Length  5.9 in 15 cm
      Insertable length 4.9in 4.9 in 12.5 cm
      Girth 5.12 in 13 cm
      Weight 12 oz 340 g

       

      Hammer | ER03
      Length  8.26 in 21 cm
      Insertable length 4.9in 7 in 18 cm
      Girth 6.69 in 17 cm
      Weight 19 oz 540 g

       

      Lollipop | ER04
      Length  5.3 in 13.5 cm
      Insertable length 4.9in 4.3 in 11 cm
      Girth 4.7 in 12 cm
      Weight 10.5 oz 300 g

       

      Pepperoncini | ER05
      Length  5.3 in 13.5 cm
      Insertable length 4.9in 4.3 in 11 cm
      Girth 4.7 in 12 cm
      Weight 10.5 oz 300 g

       

      Piston | ER06
      Length  7.5 in 19 cm
      Insertable length 4.9in 6.5 in 16.5 cm
      Girth 5.7 in 14.5 cm
      Weight 17 oz 481 g

       

      Zeus | ER07
      Length  7.5 in 19 cm
      Insertable length 4.9in 6.5 in 16.5 cm
      Girth 5.3 in 13.5 cm
      Weight 17 oz  481 g

       

      Firehose | ER08
      Length  6.4 in 16.5 cm
      Insertable length 4.9in 5.9 in 15 cm
      Girth 6.2 in 16 cm
      Weight 15.4 oz  438 g

       

      Jimmy | ER11
      Length  7.5 in 19 cm
      Insertable length 4.9in 6.5 in 15.5 cm
      Girth 5.7 in 14.5 cm
      Weight 17 oz  530 g

       

      Hard-On | ER12
      Length  6.7 in 17 cm
      Insertable length 4.9in 6.5 in 16.5 cm
      Girth 6 in 15 cm
      Weight 17 oz  530 g

       

      STP MODELS

      Goldfinger | 2nd Gen. | 4 in 1 packer
      Length  5.5 in 14 cm
      Girth 5 in 13 cm
      Weight 9 oz 250 g

       

      Wee-wee - 3rd gen. STP | Uncircumcised
      Length  4.3 in 11 cm
      Girth 4.3 in 11 cm
      Weight 8.11oz 230 g

       

      Pee-pee - 3rd gen. STP | Circumcised
      Length  4.3 in 11 cm
      Girth 4.3 in 11 cm
      Weight 8.11oz 230 g

      Emisil prosthetics are handmade, personalized items. We do not offer refunds or exchanges if the product’s appearance differs from your expectations regarding color, size, or shape. Please ensure your choices are final before placing an order.

      Our skilled artisan team is ready to start production immediately. The production process typically takes 2-5 business days to complete.

      Worldwide shipping 2–5d. Learn more.

      Shipping is handled by trusted carriers like UPS, USPS, and DHL, with tracking and signature options. Duties and taxes are included for the U.S., EU, and UK. For other countries (e.g., Canada, Australia, Brazil, Mexico, Colombia), import taxes are not covered. Please check with your local customs office for more information on applicable fees.

      1. Appliquez l'adhésif

      Avant d'appliquer l'adhésif, assurez-vous de nettoyer la zone de peau sur laquelle vous fixerez le packer. Vous devez épiler cette partie du corps, et le Applying the adhesive on FTM packerla peau doit être nettoyée correctement pour s’assurer que le packer est parfaitement fixé. Vous pouvez utiliser n’importe quel type de nettoyant pour le corps ou de lingettes humides à cet effet. Une fois la peau nettoyée, laissez-la sécher quelques secondes.

      Pour plus d'informations, vérifiez ceci Article de blog.

       2. position de l'emballeur

      FTM packer attached to the body

      Une fois l’adhésif appliqué, fixez votre packer sur la carrosserie et positionnez-le soigneusement. Veuillez essayer de vous assurer que vous le fixez dans la bonne position et essayez de ne pas le déplacer trop longtemps, car l'adhésif pourrait commencer à durcir. Après avoir positionné le packer, laissez-le sécher pendant quelques minutes.

      Essayez-le plusieurs fois à la maison pour maîtriser votre technique afin de savoir à quoi vous attendre et de vous sentir plus en confiance lorsque vous aurez besoin du S.T.P en déplacement. Ne vous découragez pas si vous dribblez une ou deux fois. Avec un peu de pratique, l'appareil Stand To Pee fonctionnera parfaitement à chaque fois.

      Harnesses & Straps

      Emisil prosthetics can be secured with harnesses or straps, ideal for active users. While they provide a snug fit, straps may stretch during the day and require readjustment. Non-standard body types may find harnesses uncomfortable, as they can slide or leave marks. It’s essential to select the right size and invest in high-quality options for comfort and functionality.

      Underwear for Packing

      For comfort during daily activities, consider specialized packing underwear. Available in various styles, FTM underwear offers a natural feel while allowing freedom of movement. However, some users may prefer not to wear underwear during intimate moments. When using harnesses or underwear, ensure the prosthetic is securely positioned before dressing, and prioritize quality from trusted brands like RodeoH. Learn more.

      Preparation: Before using the prosthesis, make sure that your skin is clean and dry. Avoid using lotions or oils as they can interfere with adhesion if you are using glue.

      Fixation of the prosthesis:

      Belts/Straps: Secure your prosthesis using a compatible belt or harness system. Adjust it for comfort so that it stays in place, especially during active wear.
      Glue is not recommended for the Erect model due to its size, as it may separate or shift during use. For best results, rely on a belt or strap to maintain a secure fit.
      Comfortable wear: Make sure the prosthesis fits your body naturally. It should feel snug but not too tight. If you use a harness, check it periodically throughout the day to make sure it's secure.

      Daily use: The prosthesis is intended for intimate activities. However, it can be worn all day as a packer, please note that since it is made of harder silicone, it may not be as comfortable as a flaccid prosthesis. Remember, this model does not have an STP (standing to pee) function.

      After use: Clean the prosthesis with mild soap and warm water, making sure it is completely dry before putting it away. Be gentle and avoid extreme temperatures. Silicone can be damaged by sharp objects such as zippers. Follow care instructions to ensure long-term durability.

      This model has a low-hanging scrotum, with two movable testicles. Testicles are floating in a special gel, providing an extremely realistic feeling.

      Professional technology of layering different silicons allow recreating ultra-realistic skin texture. Wrinkles, shades, and differences between layers, appears when you press it.

      Three layers silicone system -this means that there is no chance for the paint to rub off or color to fade. Not only a realistic uncut packer when you look at it, Pocket rocket feels ultra-realistic when you touch it as well. Massive shaft is the key to feel the power between your legs.

      Ce site est protégé par hCaptcha, et la Politique de confidentialité et les Conditions de service de hCaptcha s’appliquent.

      Emisil uncut packer FL11

      Head

      Hyperrealistic 3 silicone layers technique and the tip filled with special gel, allow you to feel the difference between softness shaft and head.

      Shaft

      Shaft position is slightly pointed down. This model is huge, but If you are a big guy, so why not. Anyway, for comfortable packing, we would like to offer you FL02.

      Dual density design

      The packer is made with double density, to mimic a real flaccid penis. The soft skin layer wraps the soft gel, so you can enjoy the super realistic feelings like never before.

      360° Scrotum

      The packer is made with double density technology to mimic a real flaccid penis. The soft first layer wraps around the inner gel, so the super realistic feeling is guaranteed.

      Learn more

      Thin tab

      We are far advanced, from the time we started producing penis prosthetics. We did a lot of testing and found new materials, which have an excellent grip with medical adhesive. Now almost all devices can be very well attached to the body using Silicone Medical Grade Adhesive.

      Learn more
      Emisil

      Natural, curly hair

      You can choose from 5 different colors of natural, curly and high-quality hair to find the perfect shade. Pubic hair is a great addition to an extra-realistic prosthetic!

      EMISIL UNCUT MOVEABLE SKIN OMG UNBOXING

      POCKET ROCKET | FL11
      Emisil discreet delivery

      Discreet delivery

      We understand that buying packers and other sexual wellbeing products can be embarrassing for some. All Emisil deliveries show up in discreet boxes with no indication of what's inside. You can be sure that you'll receive your packer with your absolute privacy in mind.

      Learn more

      Customer Reviews

      Based on 3 reviews
      100%
      (3)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      A
      Ander Jenkins (Savannah, US)
      Awesome product!

      Very realistic. Easy to attach with the right adhesive. Awesome product!

      A
      Anonymous (Dallas, US)
      Love it

      I love the size and foreskin. I just wish it was easier to slide back-and-forth without ripping.

      A
      Adrien (Garner, US)
      Nice

      Originally I was not sure if I wanted to get this based on another review.
      I bought it with the sliding "skin" in the darkest skin tone S16 without hair. It's slightly darker than I would need but it still looks great, because the top part of tab is a little lighter than the bottom half of tab and blends well with my stomach area. Both S15 and S14 looked a little too light. For comparison I've bought the lollipop in S15 (S14 would have worked too) and it is great with my complexion. In reference to the picture models used for selecting skin tone I fall between the S11 and S12 (with red undertones). My cis hetero bestfriend is amazed at the realism and I am too. I've not had this very long so I can't speak on durability and longevity. However this seems like it will last and be just as durable as my lollipop prosthetic. One more thing, a small piece of the sliding skin is attached to the head of penis (realism) so when lubing and sliding you have to be careful and not overly aggressive.


      Vu récemment