Leroy | FL05
You forget it's there! 🩲
3D scrotum
Designed for packing
Hyper - realistic skin⚠️ Since our production is handcrafted, there may be slight variations in the size.
FLACCID MODELS (soft packer)
| Junior | FL01 | ||
| Length | 3.9 in | 10 cm |
| Insertable length 4.9in | 4.9 in | 12.5 cm |
| Girth | 5.12 in | 13 cm |
| Weight | 8.11 oz | 230 g |
| Gerald | FL02 | ||
| Length | 4.7 in | 12 cm |
| Insertable length in | 3.7 in | 9.3 cm |
| Girth | 4.3 in | 11 cm |
| Weight | 7.6 oz | 215 g |
| Pickle | FL04 | ||
| Length | 3.7 in | 9.5 cm |
| Insertable length 4.9in | 2.7 in | 6.9 cm |
| Girth | 4.3 in | 11 cm |
| Weight | 8.8 oz | 250 g |
| Leroy | FL05 | ||
| Length | 3.7 in | 9.5 cm |
| Insertable length 4.9in | 2.9 in | 7.4 cm |
| Girth | 4.3 in | 11 cm |
| Weight | 9.5 oz | 270 g |
| Pcoket Rocket | FL11 | ||
| Length | 6.7 in | 17 cm |
| Insertable length 4.9in | 5.7 in | 14.5 cm |
| Girth | 5.5 in | 14 cm |
| Weight | 16.22 oz | 460 g |
ERECT MODELS
| Johnson | ER01 | ||
| Length | 5.9 in | 15 cm |
| Insertable length 4.9in | 4.9 in | 12.5 cm |
| Girth | 5.12 in | 13 cm |
| Weight | 8.11 oz | 230 g |
| Johnson | ER02 | ||
| Length | 4.9 in | 12.5 cm |
| Insertable length 4.9in | 4.9 in | 13 cm |
| Girth | 5.12 in | 13 cm |
| Weight | 12 oz | 340 g |
| Hammer | ER03 | ||
| Length | 8.26 in | 21 cm |
| Insertable length 4.9in | 7 in | 18 cm |
| Girth | 6.69 in | 17 cm |
| Weight | 19 oz | 540 g |
| Lollipop | ER04 | ||
| Length | 5.3 in | 13.5 cm |
| Insertable length 4.9in | 4.3 in | 11 cm |
| Girth | 4.7 in | 12 cm |
| Weight | 10.5 oz | 300 g |
| Pepperoncini | ER05 | ||
| Length | 5.3 in | 13.5 cm |
| Insertable length 4.9in | 4.3 in | 11 cm |
| Girth | 4.7 in | 12 cm |
| Weight | 10.5 oz | 300 g |
| Piston | ER06 | ||
| Length | 7.5 in | 19 cm |
| Insertable length 4.9in | 6.5 in | 16.5 cm |
| Girth | 5.7 in | 14.5 cm |
| Weight | 17 oz | 481 g |
| Zeus | ER07 | ||
| Length | 7.5 in | 19 cm |
| Insertable length 4.9in | 6.5 in | 16.5 cm |
| Girth | 5.3 in | 13.5 cm |
| Weight | 17 oz | 481 g |
| Firehose | ER08 | ||
| Length | 6.4 in | 16.5 cm |
| Insertable length 4.9in | 5.9 in | 15 cm |
| Girth | 6.2 in | 16 cm |
| Weight | 15.4 oz | 438 g |
| Jimmy | ER11 | ||
| Length | 7.5 in | 19 cm |
| Insertable length 4.9in | 6.5 in | 15.5 cm |
| Girth | 5.7 in | 14.5 cm |
| Weight | 17 oz | 530 g |
| Hard-On | ER12 | ||
| Length | 6.7 in | 17 cm |
| Insertable length 4.9in | 6.5 in | 16.5 cm |
| Girth | 6 in | 15 cm |
| Weight | 17 oz | 530 g |
STP MODELS
| Goldfinger | 2nd Gen. | 4 in 1 packer | ||
| Length | 5.5 in | 14 cm |
| Girth | 5 in | 13 cm |
| Weight | 9 oz | 250 g |
| Wee-wee - 3rd gen. STP | Uncircumcised | ||
| Length | 4.3 in | 11 cm |
| Girth | 4.3 in | 11 cm |
| Weight | 8.11oz | 230 g |
| Pee-pee - 3rd gen. STP | Circumcised | ||
| Length | 4.3 in | 11 cm |
| Girth | 4.3 in | 11 cm |
| Weight | 8.11oz | 230 g |
Emisil prosthetics are handmade, personalized items. We do not offer refunds or exchanges if the product’s appearance differs from your expectations regarding color, size, or shape. Please ensure your choices are final before placing an order.
Our skilled artisan team is ready to start production immediately. The production process typically takes 2-5 business days to complete.
Worldwide shipping 2–5d. Learn more.
Shipping is handled by trusted carriers like UPS, USPS, and DHL, with tracking and signature options. Duties and taxes are included for the U.S., EU, and UK. For other countries (e.g., Canada, Australia, Brazil, Mexico, Colombia), import taxes are not covered. Please check with your local customs office for more information on applicable fees.
|
We do not recommend using adhesives with the Erect models due to their size and weight, as adhesives may cause the prosthetic to disbond or shift from its position, especially during active use. While the adhesive is strong, it may not provide the necessary stability for this model. For a secure fit during an active lifestyle, we suggest using a harness or special underwear to avoid any discomfort or displacement. More information about Underwear. However, if you still choose to use adhesive, here is all the information you need to know. 1. Apply the adhesiveBefore applying the adhesive, please make sure you clean the skin area to which you will attach the packer. You need to remove hair from this part of the body, and the For more information check this Blog post. |
skin needs to be cleaned properly to make sure the packer is attached perfectly. You can use any type of body wash or wet wipes for this purpose. Once you clean the skin, let it dry for a few seconds.
2. packer position Once you applied the adhesive, attach your packer to the body and position it carefully. Please try to make sure that you attach it in the right position and try not to move it around for too long, as the adhesive may start to cure. After you position the packer, then let it dry for a few minutes. |
Harnesses & Straps
Emisil prosthetics can be secured with harnesses or straps, ideal for active users. While they provide a snug fit, straps may stretch during the day and require readjustment. Non-standard body types may find harnesses uncomfortable, as they can slide or leave marks. It’s essential to select the right size and invest in high-quality options for comfort and functionality.
Underwear for Packing
For comfort during daily activities, consider specialized packing underwear. Available in various styles, FTM underwear offers a natural feel while allowing freedom of movement. However, some users may prefer not to wear underwear during intimate moments. When using harnesses or underwear, ensure the prosthetic is securely positioned before dressing, and prioritize quality from trusted brands like RodeoH. Learn more.
Preparation: Before using the prosthesis, make sure that your skin is clean and dry. Avoid using lotions or oils as they can interfere with adhesion if you are using glue.
Fixation of the prosthesis:
Belts/Straps: Secure your prosthesis using a compatible belt or harness system. Adjust it for comfort so that it stays in place, especially during active wear.
Glue is not recommended for the Erect model due to its size, as it may separate or shift during use. For best results, rely on a belt or strap to maintain a secure fit.
Comfortable wear: Make sure the prosthesis fits your body naturally. It should feel snug but not too tight. If you use a harness, check it periodically throughout the day to make sure it's secure.
Daily use: The prosthesis is intended for intimate activities. However, it can be worn all day as a packer, please note that since it is made of harder silicone, it may not be as comfortable as a flaccid prosthesis. Remember, this model does not have an STP (standing to pee) function.
After use: Clean the prosthesis with mild soap and warm water, making sure it is completely dry before putting it away. Be gentle and avoid extreme temperatures. Silicone can be damaged by sharp objects such as zippers. Follow care instructions to ensure long-term durability.
That's the case with the Emisil FL05. How does this packer stand out from the other FL models? It has a great length and uncircumcised tip.
The length inspires confidence, with no cost to comfort. This model is designed to become a seamless part of you, so you can live, experience, and enjoy life to the fullest without worrying about discomfort or awkward moments. Be the trans man you want to be with FL05 - a lengthier & uncut model.
